
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 220 mm stroke that can be fine-tuned backward by up to 20 mm, creating a usable travel window of 200 to 220 mm.
The external stopper allows you to dial in exact end positions during commissioning without swapping hardware. It uses a 25 mm carbon steel rod and M20x1.5 thread to handle high side loads, while the extruded aluminum barrel incorporates sensor grooves on both sides. Note that the rear adjuster acts only as a travel stop, not a lock, so the load requires live air to maintain position.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 200-220 mm travel window on the fly to accommodate different part lengths during machining operations without changing the cylinder.
Use the rear stopper to fine-tune the exact retracted position during initial machine commissioning, avoiding the need to bolt on external physical stops.
Quickly adjust the retract distance by up to 20 mm to handle varying package sizes on a conveyor line, ensuring precise positioning during production shifts.
Select this 100 mm bore when an application requires substantial thrust—3927 N at 0.5 MPa or 5497 N at 0.7 MPa—along with variable end-stops for product changeovers. If your process needs less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas a 125 mm bore offers 6136 N for heavier rigs. Because the 220 mm stroke exceeds 300 mm? No, but even at 220 mm, long unsupported loads should use an external guide to prevent rod wear.
To match this ISO 15552 replacement exactly, specify a 100 mm bore, 220 mm stroke, 20 mm adjustment, PT tapered G1/2 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. For load-holding without live air pressure, choose a SAIL or BSAI series cylinder instead of relying on the adjuster.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjusting screw acts as a mechanical stopper that allows you to trim the effective stroke back by up to 20 mm. This creates a usable travel window of 200 to 220 mm, enabling fine end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.