
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 220 mm travel to a precise 190-220 mm window. The extruded aluminum barrel features sensor grooves on both sides for straightforward position feedback.
This model uses a G1/2 port and a 25 mm carbon steel rod with an M20x1.5 thread, offering robust resistance to side loads. The rear adjuster acts purely as a travel stop to fine-tune the end position during commissioning; it does not lock or hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-220 mm travel window during product size transitions without swapping the physical cylinder or reworking machine stops.
Use the rear adjusting screw to fine-tune the retract end position precisely during initial commissioning of new equipment.
Choose this adjustable-stroke model over a fixed SAI when your machine setup requires variable end-stops or product-size changeovers without physically swapping the cylinder or adding external stops. If you require more power, a bore 125 provides 8590 N at 0.7 MPa.
Because the 220 mm stroke is under the 300 mm side-load threshold, a standard external guide is less critical here than on longer strokes, though the M20x1.5 rod thread still handles moderate lateral stress well. This configuration uses a PT tapered port thread, carbon steel rod material, no sensor magnet, and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster acts as an external stopper that lets you shorten the effective travel from the nominal 220 mm down to 190 mm. It sets the deceleration end-point but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.