
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The built-in rear stopper allows you to trim the 220mm nominal stroke back by up to 40mm, creating a precise 180-220mm usable travel window for exact end-position tuning during commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when dialing in a machine setup. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic solid-state switches, though this non-magnet variant requires a magnet (-S) to trigger them. It features self-compensating air cushions at both ends (36mm cushion length) to decelerate heavy loads smoothly.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 180-220mm travel window during product-size changeovers without swapping the cylinder or adding external shims.
Fine-tune the retract end-position at commissioning using the rear adjuster screw, perfect for pressing and forming applications.
Select this 100mm bore when your application requires substantial force—stepping down to a 63mm bore drops the 0.5 MPa push force to 1559N, while moving up to a 125mm bore yields 6136N. The SAIJ100X220-40 is chosen over a fixed-stroke SAI specifically when you need a variable end-stop for product-size changeovers or fine-tuning without mechanical rework. Remember that the rear adjuster acts only as a travel stop and deceleration aid; it does not hold the load without live air. For true fail-safe load holding, consider an external rod lock or the AirTAC BSAI clamp-lock series.
Because this is a 220mm stroke, side-load risks are moderate, but you should still ensure proper guiding for long unsupported loads. It uses a PT tapered G1/2 port and supports a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Operating speed ranges from 30 to 800 mm/s.
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster acts as an external stopper that trims the 220mm nominal stroke back by up to 40mm, giving a usable travel window of 180-220mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.