
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 220 mm nominal stroke that can be dialed back by up to 40 mm, creating a precise 180-220 mm usable travel window for commissioning without adding external stops.
This variant includes a magnetic piston (-S) for electronic DMSE or reed CMSE position sensing, and uses a standard carbon steel rod with PT tapered port threads. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. While the rear adjuster sets the travel end and the variable air cushions decelerate the load, neither component will hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 180-220 mm travel window during line changeovers to accommodate new product dimensions without physically swapping out the cylinder.
Use the 40 mm rear adjustment screw to fine-tune the retract end-position at commissioning, eliminating the need to bolt on external mechanical stops.
Choose this adjustable-stroke model over a fixed SAI cylinder when your application requires variable end-stops or fine-tuning during machine setup and product changeover. For higher force requirements, a 125 mm bore provides 6133 N. This SAIJ100X220-40-S configuration includes a 100 mm bore, 220 mm stroke, 40 mm adjustment range, PT port threads, and a magnet for CMSE/DMSE sensors.
Because this cylinder features a 220 mm stroke, it is below the 300 mm threshold where an external guide becomes strictly critical, but the robust 25 mm rod and M20x1.5 rod thread handle substantial side loads. The mounting set is a reduced SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If your application requires true load-holding without continuous air pressure, consider the SAIL pneumatic lock or BSAI clamp-lock cylinders instead of relying on the adjuster stop.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 220 mm nominal stroke by up to 40 mm, providing a usable travel window of 180-220 mm. It is a travel stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.