
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 50 mm adjustment range, allowing you to dial back the 220 mm nominal stroke to create a precise 170-220 mm usable travel window during commissioning.
The external stopper screw lets you fine-tune the retract end position on product changeovers without swapping the cylinder or adding external stops. This unit features a robust 25 mm carbon steel rod with an M20x1.5 thread, paired with 36 mm air cushions at both ends to absorb kinetic energy. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 170-220 mm window for multi-model production lines without mechanical redesign.
Quickly fine-tune the stroke end during commissioning or product size changes using the rear screw instead of adding external stops.
Choose this 100 mm bore when 80 mm (2513 N at 0.5 MPa) is insufficient, but a 125 mm bore (6136 N) would over-engineer the machine. The 50 mm adjustment range is ideal for machinery requiring variable end-stops or precise product-size changeovers. For holding loads without live air pressure, note that the rear adjuster is a travel stop, not a lock; select an AirTAC SAIL or BSAI cylinder, or use an external rod lock.
To match this ISO 15552 interchangeable cylinder, specify a 220 mm stroke, 50 mm adjustment, PT tapered port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the 220 mm stroke exceeds 300 mm? No, but for any long stroke, the 25 mm rod handles side loads better than smaller bores, yet an external guide is still recommended for unsupported loads.
Quick checklist
At the maximum 1.0 MPa, it delivers up to 801 kgf.
The rear adjuster acts as a mechanical stop that trims the effective travel back by up to 50 mm, creating a 170-220 mm usable window. It sets the travel end and deceleration point, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.