
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its external stopper screw allows you to dial back the 220mm nominal stroke by up to 75mm, creating a usable travel window of 145 to 220mm. This fine-tuning capability is ideal for dialing in exact end positions during commissioning without the need to physically swap out the cylinder or bolt on external stops.
The 25mm carbon steel piston rod and M20x1.5 rod thread provide substantial rigidity for handling heavy loads, while the G1/2 PT tapered port ensures high airflow for a standard operating speed of 30-800mm/s. It features an extruded aluminum barrel with sensor grooves on both sides, and the mounting set is strictly limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some other variants.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract distance from 145mm to 220mm to accommodate different material lengths or feeding depths without changing the cylinder mounting.
Speed up product line changeovers by turning the rear adjuster screw to set new end positions on the fly, minimizing downtime between production runs.
Fine-tune the final retract position during initial machine setup to achieve exact alignment with downstream tooling, avoiding the need for custom shims.
The 75mm adjustment range is particularly valuable for production lines that frequently process varying product sizes, allowing operators to reposition the retract end-stop on the fly. For any fixed-position requirements where live air is removed, note that this rear adjuster acts purely as a travel stop and not a lock; you would need to specify a SAIL or BSAI cylinder, or add an external rod lock, to hold loads securely without air pressure.
When replacing an ISO 15552 cylinder, match the 100mm bore, 220mm stroke, 75mm adjustment range, G1/2 PT port, and your required mounting accessory. Because the stroke is 220mm, ensure an external guide is used if the load is long or unsupported to prevent excessive side-loading on the rod.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 5497N.
The rear stopper screw lets you shorten the 220mm nominal stroke by up to 75mm, resulting in a usable travel window of 145 to 220mm. This allows precise end-position tuning without swapping cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.