
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X220-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X220-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 145-220 mm usable travel window, letting you dial back the nominal 220 mm stroke by up to 75 mm during commissioning.
This -S variant includes a magnet for position sensing and works seamlessly with AirTAC CMSE reed and DMSE electronic switches. The extruded aluminum barrel features sensor grooves on both sides. The rear adjuster acts purely as a mechanical stop to fine-tune the end position; it does not hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X220-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 145-220 mm travel window on the fly to accommodate different part lengths during machining changeovers.
Dial in exact end positions during machine setup without physically swapping out the entire cylinder or adding shims.
The 75 mm adjustment window is ideal for machines processing varying product sizes, allowing you to shift the end-stop on the fly without adding external stops or swapping the cylinder. For any stroke of 300 mm or more, an external guide is recommended to prevent side-load wear, though the 25 mm rod and M20x1.5 thread offer high rigidity here.
To match this ISO 15552 cylinder, specify: 100 mm bore, 220 mm stroke, 75 mm adjustment, PT port threads, your required mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and the -S magnet option.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from 220 mm down to as little as 145 mm. This creates a 145-220 mm travel window for fine-tuning end positions at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.