
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X225-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X225-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 125-225 mm usable travel window, allowing you to dial back the 225 mm nominal stroke by up to 100 mm during commissioning.
This configuration uses a carbon steel piston rod and lacks a standard magnet. The rear adjuster acts purely as a travel stop to fine-tune end positions, meaning it will not hold a load without continuous live air pressure. For load-holding requirements without air, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X225-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 125 and 225 mm to accommodate multiple product lengths on a single conveyor line without mechanical rebuilds.
Quickly reconfigure the stroke length during product family transitions, using the rear stopper to fine-tune the end position rather than replacing the entire actuator.
Select this 100 mm bore cylinder when an application demands high thrust (7068 N at 0.9 MPa) alongside flexible end-positioning. If you need less force, the 80 mm bore provides 4523 N at 0.9 MPa, whereas stepping up to 125 mm yields 11045 N. The SAIJ is chosen over a fixed-stroke SAI when you need on-the-fly product changeovers without swapping the cylinder or adding external stops.
Because the nominal stroke is 225 mm, an external guide is recommended to prevent excessive side-loading on the 25 mm rod. To replace an ISO 15552 cylinder, match the 100 mm bore, 225 mm stroke, 100 mm adjustment, PT G1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
At 0.5 MPa, the push force is 3927 N.
The rear adjuster acts as a mechanical stop that trims the effective travel. For this 225 mm stroke model, the -100 code creates a usable travel window of 125 to 225 mm, allowing precise end-position tuning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.