
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X225-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X225-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 225 mm travel to a precise 195-225 mm window during commissioning. It features a carbon steel piston rod and PT tapered port threads.
The rear adjustment mechanism acts purely as a mechanical stop to fine-tune the end position without adding external stops or swapping cylinders. It is not a locking device and cannot hold a load without live air pressure; for true load-holding, consider the SAIL or BSAI series. This model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X225-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 195-225 mm travel window during product size changes without replacing the cylinder or reworking the machine frame.
Use the rear stopper to fine-tune the retracted position for multi-tier tooling setups that require precise end-position tweaking.
The 30 mm adjustable stroke is ideal for product changeovers where the exact end-of-stroke varies slightly between parts. Because the total stroke is 225 mm, the 25 mm rod diameter handles side loads well, though any long unsupported travel still requires an external guide. To match this ISO 15552 interchangeable cylinder, specify: 100 mm bore, 225 mm stroke, 30 mm adjustment, PT G1/2 port, and no magnet (standard).
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel from the 225 mm nominal stroke down to a minimum of 195 mm, giving you a 30 mm tuning window without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.