
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X225-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X225-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 225 mm stroke with a 40 mm adjustment range, yielding a usable travel window of 185 to 225 mm. This built-in stopper allows you to fine-tune the retract end position at commissioning without swapping out the physical cylinder.
It features a carbon steel piston rod with an M20x1.5 thread, and PT tapered port threading for sealed pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X225-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract distance from 225 mm down to 185 mm instantly on the line when switching to a shorter workpiece, bypassing the need for mechanical spacer changes.
Acts as a robust hard stop for heavy conveyor diverters, letting operators fine-tune the exact resting position during initial commissioning.
Provides a 40 mm setup window to perfectly dial in the end-of-stroke contact point against high-force press tools without replacing the actuator.
Select this 100 mm bore when an application requires substantial thrust—up to 3927 N at 0.5 MPa—but also demands on-the-fly end-position tuning for product size changeovers. Choosing the SAIJ adjustable type over a fixed SAI cylinder eliminates the need to bolt on external stops during machine setup.
Because the 225 mm stroke exceeds 300 mm? No, but at 225 mm it is still vital to manage side loads; use an external guide to prevent rod binding. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For true load-holding without pneumatic pressure, select a SAIL lock or BSAI clamp-lock cylinder. This model uses PT ports and supports the SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
It features a rear adjuster screw that acts as a mechanical stop, allowing you to shorten the effective stroke from 225 mm down to a minimum of 185 mm, creating a 40 mm adjustable travel window.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.