
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X225-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its integrated adjusting screw provides a usable travel window of 150 to 225mm, allowing precise end-position tuning without adding external stops. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches if a magnet is added later.
This 100mm bore actuator uses a G1/2 port and a 25mm carbon steel rod with an M20x1.5 thread, offering high structural rigidity. The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the built-in variable air cushions for deceleration; it does not hold the load without live air pressure. For true load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X225-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact clamping distance for varying product sizes directly at the rear screw, achieving precise 150-225mm travel limits without mechanical rework.
Speed up format changeovers on automated lines by turning the rear adjuster to accommodate new part dimensions, keeping the ISO 15552 footprint intact.
Fine-tune the final retract position during setup to compensate for mechanical tolerances, avoiding the need to add external stopper blocks.
The 75mm adjustment range is ideal for machinery requiring frequent product-size changeovers, letting operators dial in the exact end-stop on the fly rather than swapping a fixed-stroke SAI cylinder. To match this ISO 15552 replacement, specify the 100mm bore, 225mm stroke, 75mm adjustment, PT tapered port threads, and the required mounting bracket from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Because the 225mm stroke is relatively long, ensure adequate external guidance to prevent excessive side loads on the rod.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw lets you mechanically shorten the 225mm nominal stroke by up to 75mm, creating a usable travel window of 150 to 225mm. It functions as a physical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.