
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X230-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X230-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 220 to 230 mm, allowing you to dial in the exact retract position during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific configuration ships without a magnet.
The rear adjuster acts purely as a travel stop to set the end position, meaning it will not hold the load dynamically without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X230-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-position by up to 10 mm during product size changes without disassembling the cylinder or adding external mechanical stops.
Dial in the exact 220 to 230 mm travel window during machine commissioning to perfect the seating position of critical tooling.
Choose this adjustable-stroke model when your application requires fine-tuning the retract distance within a 10 mm range on a 230 mm nominal stroke, avoiding the need to physically swap cylinders during product changeovers. This specific SKU features PT tapered port threads and a standard carbon steel rod.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 230 mm stroke, 10 mm adjustment range, G1/2 port, and required mounting accessory. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, explicitly omitting FB, CA, CB, and CR brackets. Because the 230 mm stroke is well below the 1500 mm maximum standard stroke for this bore, no external side-load guide is strictly required, though the robust 25 mm rod naturally handles higher eccentric loads than smaller diameters.
Quick checklist
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from 230 mm down to a minimum of 220 mm. It sets the travel end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.