
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X230-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X230-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 130 to 230 mm. This broad 100 mm adjustment range allows operators to dial in the exact retract end-position during commissioning or product changeovers without swapping out the physical actuator.
Because it is an extruded aluminum profile cylinder rather than a tie-rod design, the barrel integrates sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The SAIJ series utilizes a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. The rear adjuster acts purely as a mechanical stop to set the travel end and deceleration alongside the variable air cushions, but it does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X230-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Perfect for packaging lines that handle varying carton sizes, allowing operators to quickly reposition the retract stop within the 130-230 mm window for rapid format changeovers.
Enables precise mechanical end-position tuning during equipment setup without machining custom spacer rings or adding external stopper blocks to the fixture.
If your process demands less force, stepping down to an 80 mm bore yields 4523 N at 0.9 MPa, whereas moving up to a 125 mm bore provides 11045 N at 0.9 MPa. The adjustable stroke is ideal for machines processing multiple product sizes, as the 130-230 mm travel window can be fine-tuned on the fly instead of installing a fixed-stroke SAI cylinder.
When replacing an ISO 15552 actuator, match the 100 mm bore, 230 mm nominal stroke, 100 mm adjustment range, PT port thread type, and the desired mounting bracket. Since this unit lacks a magnet, order it with a -S suffix if CMSE or DMSE position sensing is required. For any stroke of 300 mm or more, external guidance is recommended to manage side loads, though this 230 mm unit is well within standard operating parameters.
Quick checklist
At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N and the pull force reaches 6626 N.
The SAIJ100X230-100 has a nominal stroke of 230 mm with a 100 mm adjustment range, creating a usable travel window of 130 to 230 mm. A rear screw mechanism acts as a mechanical stop to shorten the effective stroke, but it is not a lock and cannot hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.