
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X230-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X230-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 210 to 230 mm, allowing you to dial back the nominal 230 mm stroke by up to 20 mm during commissioning.
The external adjusting screw acts purely as a mechanical stop to fine-tune the retract end position without adding external stops. It is not a locking device, so live air pressure is required to hold the load. For position holding without air, consider the SAIL or BSAI series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X230-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end position up to 20 mm during product size changes without physically replacing the cylinder.
Set precise ejection or pusher distances on a moving line, adjusting the travel window between 210 and 230 mm as needed.
The adjustable 210-230 mm travel is ideal for product changeovers on a line, eliminating the need to physically swap a fixed-stroke SAI cylinder. To match this ISO 15552 footprint, verify the 230 mm stroke, 20 mm adjuster, G1/2 PT port, and required mounting accessory.
With a 230 mm stroke, the 25 mm rod and M20x1.5 thread handle substantial side loads, but an external guide rail is still recommended for heavy loads. The standard variable air cushions at both ends decelerate the motion, but they do not function as a brake.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective travel from 230 mm down to 210 mm. This enables fine end-position tuning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.