
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X230-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X230-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster.
This 100mm bore actuator uses a G1/2 port and a 25mm carbon steel rod with an M20x1.5 thread, offering high side-load resilience for heavy conveying tasks. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR brackets to streamline your setup choices.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X230-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 190-230mm travel window during product size changes to set precise end positions without swapping actuators.
Dial in the exact end-of-stroke position during commissioning to accommodate sensor placement and mechanical stops without external hardware.
The adjustable stroke is ideal for product changeovers where the exact end-of-travel position varies, eliminating the need to physically swap out a fixed-stroke SAI cylinder or bolt on external stops.
For a dimensionally interchangeable ISO 15552 replacement, match the 100mm bore, 230mm stroke, 40mm adjustment, G1/2 PT port, and your required mounting bracket. Because the 230mm stroke exceeds 300mm only in larger configurations, standard side-load guidance is still recommended for heavy loads. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series.
Quick checklist
The maximum operating pressure is 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 230mm nominal stroke down to 190mm. This creates a 190-230mm usable window for fine-tuning end positions at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.