
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X230-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X230-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical adjuster that allows you to trim the nominal 230 mm stroke back by up to 50 mm. This creates a usable travel window of 180 to 230 mm, letting you dial in the exact end position during commissioning without swapping out the physical actuator.
This unit features a standard carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and because this model carries the -S magnet option, it directly supports AirTAC CMSE reed and DMSE solid-state switches for precise position feedback. The rear adjuster acts purely as a travel stop to set deceleration limits, so it will not hold a load safely without continuous live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X230-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt a packaging line to different carton sizes by dialing the stroke back from 230 mm to 180 mm via the rear adjuster, avoiding the need to physically swap cylinders.
Set precise retract limits for heavy-duty press operations, using the mechanical stop to consistently repeat the end position within the 50 mm adjustment window.
The adjustable 180 to 230 mm travel window is ideal for production lines that undergo frequent product-size changeovers, as operators can fine-tune the retract end position on the fly instead of adding external mechanical stops.
For exact ISO 15552 interchangeability, match the 100 mm bore, 230 mm stroke, 50 mm adjustment range, G1/2 port size, and the -S magnet requirement. Since the 230 mm stroke exceeds 300 mm, evaluate your specific load to determine if external guidance is needed to prevent excessive side-loading on the 25 mm rod. Remember that the rear adjuster only functions as a stroke stop; for true load-holding without live air, select an AirTAC SAIL or BSAI series cylinder instead. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The nominal stroke is 230 mm, but the rear adjuster allows you to shorten the effective stroke by up to 50 mm. This provides a usable travel window of 180 to 230 mm, which can be fine-tuned during commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.