
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X230-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X230-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 155 to 230 mm, allowing you to dial back the nominal 230 mm stroke by up to 75 mm during commissioning.
This model uses a G1/2 port and a 25 mm carbon steel rod with an M20x1.5 thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. If you require position sensing, adding the -S magnet option enables compatibility with AirTAC CMSE reed and DMSE electronic sensors.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X230-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract end-position for different product sizes on a packaging line without disassembling the cylinder mount.
Dial in the exact 155 to 230 mm travel window during initial commissioning to perfect timing and avoid mechanical hard stops.
Select this 100 mm bore cylinder when an application demands high thrust—stepping down to a 63 mm bore drops the 0.5 MPa push force to 1559 N, whereas this SAIJ100X230-75 provides 3927 N. The 75 mm adjustment range is ideal for product changeovers, letting you fine-tune the retract end-position without swapping the cylinder or adding external stops. To match this ISO 15552 replacement exactly, specify the 100 mm bore, 230 mm stroke, 75 mm adjust, PT tapered G1/2 port, and your required mounting bracket.
Because the 230 mm stroke exceeds 200 mm, ensure adequate side-load support by guiding the load externally to prevent rod binding. Remember that the rear adjuster acts only as a travel stop and the air cushions handle deceleration; neither will hold a load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjuster screw acts as an external stopper, allowing you to shorten the effective travel from the nominal 230 mm down to a minimum of 155 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.