
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X240-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 240mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X240-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 210-240mm usable travel window, allowing you to dial back the 240mm nominal stroke by up to 30mm during commissioning without adding external stops.
The extruded aluminum barrel includes dual sensor grooves, though this specific configuration omits the magnet. It uses a standard carbon steel rod and PT tapered ports. The rear adjuster acts purely as a mechanical stop to set the end position; it does not lock or hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X240-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 210-240mm travel window during initial commissioning to perfectly dial in the end position without swapping cylinders.
Quickly adjust the rear stop up to 30mm to accommodate varying product lengths on a production line.
Choose this 100mm bore when 80mm (3518N at 0.7 MPa) is too weak or 125mm (8590N at 0.7 MPa) is oversized. The adjustable 210-240mm window is ideal for product changeovers where exact end-of-stroke positioning varies. Unlike a fixed SAI cylinder, the rear screw allows on-the-fly fine-tuning. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 240mm stroke is under 300mm, side-load stress is moderate, but external guides are still recommended for heavy lateral loads.
Quick checklist
At 0.9 MPa, the push force reaches 7068N.
The rear adjuster allows you to shorten the effective stroke by up to 30mm, providing a usable travel window of 210-240mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.