
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X240-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 240mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X240-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 200 to 240 mm, allowing you to dial back the 240 mm nominal stroke by up to 40 mm during commissioning.
Equipped with a 25 mm carbon steel rod and an M20x1.5 rod thread, it handles high side loads effectively, though any 240 mm stroke still requires an external guide for optimal stability. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X240-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 200-240 mm end position during format changes without physically replacing the cylinder or repositioning external stop blocks.
Use the 40 mm rear adjustment screw to fine-tune the retract stroke during initial commissioning, accommodating mechanical tolerances easily.
The adjustable 200-240 mm travel window is ideal for product changeovers on a line, letting you fine-tune the end position without swapping cylinders or adding external stops.
Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For position holding without continuous air, consider the SAIL (air-released lock) or BSAI (clamp-lock) series. This cylinder is dimensionally interchangeable per ISO 15552, features a PT tapered port (G1/2), and operates effectively at speeds of 30-800 mm/s.
Quick checklist
The maximum thrust is 801 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from the 240 mm nominal stroke down to a minimum of 200 mm. This creates a 200-240 mm adjustable window for precise end-position tuning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.