
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X240-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 240mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X240-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the external stopper screw, you can trim the nominal 240 mm stroke back by up to 75 mm, creating a highly versatile 165 to 240 mm usable travel window for precise end-position tuning during commissioning.
This model incorporates a durable carbon steel rod and uses PT tapered port threads for secure pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic sensors directly without extra brackets. The rear adjuster acts purely as a mechanical travel stop to set deceleration endpoints, so it will not hold a load safely without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X240-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 165-240 mm travel window instantly on the factory floor when switching between product sizes, eliminating the need to swap out cylinders or add physical shims.
Perfect for prototype machinery where the exact required stroke is unknown at design time, allowing engineers to safely limit the 240 mm travel during initial testing.
Select this 100 mm bore unit when your application requires substantial thrust, as stepping down to an 80 mm bore drops the 0.5 MPa push force to 2513N. The 75 mm adjustment range is ideal for machinery that undergoes frequent product-size changeovers, allowing operators to dial in the exact end-stop on the fly without fabricating external spacers or replacing a fixed-stroke SAI cylinder. Since the 240 mm stroke exceeds the 300 mm threshold where rod deflection becomes pronounced, this model is manageable, but for any future stroke extensions, an external guide rail is recommended to prevent side-load wear on the rod seals.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 240 mm nominal stroke, 75 mm adjuster, PT port, and standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because this unit lacks an -S magnet, it cannot host position sensors out of the box. For load-holding requirements without continuous air pressure, consider the SAIL or BSAI series instead of relying on the stopper screw.
Quick checklist
The rear mechanical stopper allows you to shorten the effective stroke from the nominal 240 mm down to a minimum of 165 mm. This provides a 75 mm adjustable window for setting the exact end position without altering the cylinder's physical mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.