
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X250-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 250mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X250-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 250 mm stroke with a 10 mm external adjustment screw, creating a 240-250 mm usable travel window for precise end-position tuning during commissioning.
This model features a robust 25 mm carbon steel rod with an M20x1.5 thread, paired with G1/2 PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for direct CMSE or DMSE switch mounting. Mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations to streamline setup.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X250-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 240-250 mm travel window during machine commissioning to achieve perfect press fits without machining custom spacers.
Quickly adjust the rear stop by up to 10 mm to accommodate slight length variations when switching between product runs on an automated line.
The 10 mm rear adjuster is ideal for applications requiring exact end-stop calibration without adding external stops or swapping components. Note that the rear adjuster acts as a travel stop and deceleration point, not a lock; the cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series, or use an external rod lock.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 250 mm nominal stroke, 10 mm adjustment range, G1/2 PT ports, and the specific mounting accessory. Because this is a 250 mm stroke, ensure adequate side-load support by guiding the load externally to prevent rod binding, despite the sturdy 25 mm rod diameter.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf.
The rear adjuster acts as an external stopper that lets you trim the effective stroke back by up to 10 mm from the 250 mm nominal length, giving a 240-250 mm travel window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.