
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X250-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 250mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X250-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 250 mm stroke with a 100 mm adjustment range, yielding a usable travel window of 150 to 250 mm.
This model uses a carbon steel piston rod with an M20x1.5 thread and a G1/2 port. The rear adjuster acts as a mechanical stop to fine-tune the retract end position during commissioning or product changeovers. It is not a locking device; for load-holding without live air pressure, consider the SAIL or BSAI series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X250-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 150 to 250 mm during line changeovers to accommodate varying package sizes without changing hardware.
Fine-tune the final end-stop during machine commissioning to compensate for mechanical wear or assembly tolerances using the rear adjuster.
Choose this 100 mm bore cylinder when your application requires substantial force—3927 N at 0.5 MPa—and a highly flexible end-stop. The 100 mm adjustment range on this 250 mm stroke allows you to dial back the travel to 150 mm, which is ideal for machines handling multiple product sizes without swapping cylinders.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 250 mm nominal stroke, 100 mm adjustment, G1/2 port, and PT thread type. Because the stroke is 250 mm, ensure adequate support to prevent rod side-loading, using an external guide if necessary. The standard carbon steel rod and lack of a magnet mean no position sensors are installed.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective travel from the 250 mm nominal stroke down to 150 mm. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.