
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X260-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 260mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X260-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a 260 mm nominal stroke and a 30 mm adjustment range, it provides a usable travel window of 230-260 mm for precise end-position tuning.
This model features a robust 25 mm carbon steel piston rod with an M20x1.5 male thread, paired with PT tapered G1/2 ports. The extruded aluminum barrel includes dual-side sensor grooves for mounting CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear stopper screw allows you to dial in the retract end without adding external stops, though it acts only as a travel limiter and not a load-holding lock.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X260-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 230 and 260 mm during machine commissioning to accommodate varying part sizes without external stop blocks.
Quickly adjust the stroke window on a packaging line diverter to handle different carton lengths, using the 30 mm rear stopper screw for rapid setup.
If your force needs are lighter, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. The adjustable-stroke design is ideal for machine setups requiring variable end-stops during product changeovers, offering more flexibility than a fixed-stroke SAI cylinder.
For load-holding without live air pressure, note that this SAIJ's rear adjuster and air cushions function only as travel stops and deceleration devices, not as brakes; you would need an SAIL or BSAI cylinder for locking. This model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552. At a 260 mm stroke, the 25 mm rod handles moderate side loads, but an external guide is recommended for heavy off-center loads.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 801 kgf.
The rear adjuster screw allows you to shorten the effective travel by up to 30 mm from the 260 mm nominal stroke, creating a 230-260 mm usable window. It acts as a physical stop to set the end position and does not hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.