
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X260-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 260mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X260-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the 260 mm nominal travel back by up to 75 mm, creating a precise 185-260 mm usable window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
This model uses a 25 mm carbon steel rod with an M20x1.5 thread, providing robust resistance against side loads, though the 260 mm stroke still benefits from an external guide. The rear adjuster acts purely as a travel stop to fine-tune end positions during commissioning; it is not a lock, so holding loads without live air requires a SAIL or BSAI variant.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X260-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 185-260 mm travel window during product size transitions to set new end positions quickly without adding external mechanical stops.
Fine-tune the retract stroke at commissioning to perfect machine timing, using the rear screw to absorb setup tolerances rather than repositioning the whole cylinder.
Choose this adjustable-stroke cylinder when your machine setup requires variable end-stops or frequent product changeovers without physically swapping out components. If you need slightly less force, stepping down to an 80 mm bore yields 4523 N at 0.9 MPa, while moving up to a 125 mm bore provides 11045 N for heavier loads. Since the 260 mm stroke is 260 mm or more, ensure your system includes an external guide to manage side-load stress on the rod.
When matching an ISO 15552 replacement, verify the 100 mm bore, 260 mm stroke, 75 mm adjustment range, PT tapered port thread, and your required mounting set. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. This cylinder operates without a magnet; add the -S suffix if sensor detection is needed.
Quick checklist
It can deliver a maximum of 801 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the 260 mm nominal stroke by up to 75 mm, providing an effective travel window of 185 to 260 mm. This stop sets the travel end and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.