
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X280-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 280mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X280-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 280 mm nominal stroke that can be fine-tuned down by up to 30 mm, providing a usable travel window of 250-280 mm. This built-in adjustability allows operators to dial in exact end positions during commissioning or product changeovers without swapping out the entire actuator. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for use with AirTAC CMSE reed and DMSE electronic solid-state switches.
It uses a G1/2 port and a 25 mm carbon steel rod with an M20x1.5 thread. The rear adjusting screw acts purely as a mechanical stop to set the retract position; it does not lock or hold the load without continuous air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X280-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 250-280 mm retract distance on packaging lines when switching between different carton or pallet sizes without changing hardware.
Fine-tune the end-of-stroke position during initial commissioning to achieve precise mechanical alignment, absorbing minor tolerances in the machine frame.
The adjustable 250-280 mm travel window is perfect for machines processing multiple product sizes, allowing you to trim the retract distance on the fly rather than installing external stops or buying a fixed-stroke SAI cylinder. As an ISO 15552 profile cylinder, it is dimensionally interchangeable with standard cylinders from other manufacturers utilizing the same mounting interface.
When ordering a replacement, verify the 100 mm bore, 280 mm stroke, 30 mm adjustment range, PT tapered port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments, omitting FB, CA, CB, and CR styles. Because the stroke is 280 mm, ensure adequate external guiding to prevent excessive side-loading on the 25 mm rod, and remember that the air cushions at both ends decelerate the load but do not function as a brake.
Quick checklist
The rear of the cylinder features an external adjusting screw that acts as a mechanical stop. For this model, you can trim the 280 mm nominal stroke back by up to 30 mm, creating a usable travel window of 250-280 mm to perfectly tune the end position.
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.