
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X375-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 375mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X375-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical stroke adjuster. It delivers a robust 3927 Newtons of push force and 3681 Newtons of pull force at 0.5 MPa, making it suitable for heavy-duty actuation. The integrated -S magnet enables position detection across the 375 mm stroke using CMSE reed and DMSE electronic solid-state sensors.
This model features a 40 mm adjustment range, creating a usable travel window between 335 and 375 mm. You can fine-tune the retract end-position directly at commissioning without adding external stops. The 25 mm carbon steel rod and M20x1.5 rod thread handle high side loads, while the extruded aluminum barrel incorporates variable air cushions at both ends to dampen impact.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X375-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract end-stop within the 335-375 mm window during product size changes without swapping out the entire cylinder assembly.
Adjust the stroke on the fly to fine-tune the pusher distance for varying package widths on a high-speed packaging line.
If your load demands less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas a 125 mm bore provides 6136 N for heavier setups. The 40 mm adjustment range is perfect for accommodating product size changeovers on a line, offering a 335-375 mm travel window. Because the nominal stroke is 375 mm, an external guide rail is recommended to prevent excessive side-loading on the extended rod.
For ISO 15552 dimensional interchangeability, verify the 100 mm bore, 375 mm stroke, 40 mm adjustment, PT tapered port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster and air cushions act only as travel stops and deceleration devices; they do not hold the load without live air. For fail-safe load holding, consider an external rod lock or the AirTAC SAIL and BSAI series.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 375 mm down to 335 mm. This creates a 40 mm adjustable window for fine-tuning the end position at commissioning without needing external stops.
At 0.5 MPa operating pressure, it provides 3927 Newtons of push force and 3681 Newtons of pull force. At the maximum 1.0 MPa pressure, the push force reaches 7068 Newtons.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.