
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X40-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 40mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X40-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in magnet (-S) supports position sensing.
This specific SKU provides a usable travel window of 10-40mm, allowing you to dial back the 40mm nominal stroke by up to 30mm. Rather than machining custom spacers or swapping cylinders during product changeovers, the external rear stopper lets you fine-tune the retract end-position directly at commissioning. The adjuster acts purely as a travel stop and does not hold the load without live air.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X40-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 10-40mm window during machine commissioning without machining custom spacers.
Quickly adapt the cylinder's stroke on packaging lines when switching to a different product size that requires less travel.
The adjustable 10-40mm travel window is ideal for setups requiring precise end-position tuning without external stops. For exact ISO 15552 replacement matching, verify the 40mm stroke, 30mm adjustment range, G1/2 PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because the 40mm stroke is relatively short, side-loading is less of a concern than with longer strokes, but the 25mm rod still handles substantial lateral loads. Remember that the rear adjuster only sets the travel end; it is not a lock. For load-holding without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At 0.7MPa, the push force increases to 5497N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 40mm nominal stroke by up to 30mm. This creates a usable travel window of 10-40mm, which can be fine-tuned during setup. The adjuster is a stop, not a lock, so it will not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.