
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows operators to dial in exact end positions during commissioning or product changeovers without swapping the cylinder.
Because this is a -S variant, the extruded aluminum barrel includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches mounted in the dual side sensor grooves. The M20x1.5 piston rod is paired with a PT tapered port, and the cylinder relies on variable air cushions at both ends to decelerate the load. The rear stopper only sets the travel end; it does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 325-425mm travel window on packaging lines to accommodate different carton lengths without changing out the actuator.
Fine-tune the retract position during machine setup to achieve precise tooling alignment, using the rear screw rather than adding external shims.
Adjust the stroke on a sorting diverter arm to push varying package depths accurately without repositioning the main cylinder mount.
The 100mm adjustment range is ideal for packaging lines or assembly fixtures handling multiple product sizes, letting you reposition the retract stop on the fly instead of adding external bumpers. For load-holding without continuous air pressure, pair this cylinder with an external rod lock or select an AirTAC SAIL or BSAI model instead.
When replacing an ISO 15552 cylinder, match the 100mm bore, 425mm stroke, PT port threads, and the -S magnet requirement. Supported mounts include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 425mm, the M20x1.5 rod is subject to leverage over that distance; always use an external guide to prevent side-load damage.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the 425mm nominal stroke by up to 100mm, giving a usable travel range of 325-425mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.