verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke425 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$260.69 $281.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S

The AirTAC SAIJ100X425-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables precise tracking using CMSE reed or DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves.

With a 425mm nominal stroke and a 20mm adjustment range, this SKU provides a usable travel window of 405 to 425mm. This allows operators to fine-tune the retract end-position at commissioning without adding external stops. The carbon steel rod features an M20x1.5 thread, and the cylinder omits FB, CA, CB, and CR mounts, utilizing a focused set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke425 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×425Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S Is Used

settings_input_component

Product Changeovers

Dial in the 405-425mm travel window during format changes to accommodate varying package sizes without swapping hardware.

factory

Machine Commissioning

Fine-tune the end-of-stroke position during initial setup to clear mechanical obstructions, avoiding the need for external bumpers.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S the Right Cylinder?

Because the nominal stroke is 425mm, an external guide is recommended to handle side loading and prevent excessive wear on the M20x1.5 carbon steel rod.

The adjustable stroke is ideal for product-size changeovers on a line, functioning as a travel stop rather than a lock. It cannot hold a load without live air pressure; for dead-load holding, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 dimensionally interchangeable cylinder, specify the 100mm bore, 425mm stroke, 20mm adjuster, PT tapered port thread, and the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S FAQ

The maximum thrust is 801 kgf at 1.0 MPa.

The rear adjuster acts as a mechanical stop, allowing you to shorten the 425mm nominal stroke by up to 20mm, creating a 405-425mm usable travel window. It sets the retract position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X425-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.