
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the retract end position during commissioning. With a nominal 425 mm stroke and a 30 mm adjustment range, it delivers a usable travel window of 395 to 425 mm without requiring external stops.
The extruded aluminum barrel features sensor grooves on both sides for straightforward position feedback. It uses a 25 mm carbon steel rod with an M20x1.5 thread, providing substantial rigidity, though the 425 mm length means an external guide is recommended to manage side loads. The rear screw acts purely as a travel stop and does not lock the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 395 to 425 mm travel window during line format changes to accommodate different package sizes without swapping hardware.
Fine-tune the retract stop during machine commissioning to achieve exact positioning, avoiding the need to add physical shims.
Choose this adjustable-stroke model over a fixed SAI when your application requires variable end-stops for product changeovers or precise end-position tuning on the fly. If you need less force, stepping down to an 80 mm bore yields 4523 N at 0.9 MPa, whereas a 125 mm bore offers 11045 N for heavier loads. Since the 425 mm stroke is relatively long, ensure your setup includes an external guide to support the rod and prevent binding.
For an exact ISO 15552 replacement, match the 100 mm bore, 425 mm stroke, 30 mm adjustment, PT tapered port threads, and standard carbon steel rod. Remember that the rear adjuster only sets the travel limit; it is not a locking device. For load-holding without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw allows you to trim the effective travel back by up to 30 mm. This creates a usable stroke window of 395 to 425 mm, letting you set the exact retract end-position without changing the cylinder.
The maximum push force is 801 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.