
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 395 to 425 mm. It delivers substantial thrust, pushing 7068 N at 0.9 MPa, making it suitable for heavy-duty positioning tasks. The integrated -S magnet allows for direct mounting of CMSE reed and DMSE electronic sensors along the dual-side barrel grooves.
This model features a robust 25 mm carbon steel rod with an M20x1.5 thread, paired with PT tapered ports for secure pneumatic connections. The rear adjuster functions strictly as a mechanical stop to dial in the retract position during commissioning; it does not lock the load without continuous air pressure. For applications requiring dead-stop holding, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 395-425 mm retract position during line format changes without physically swapping cylinders or repositioning hard stops.
Adjust the travel window on the fly during machine commissioning to perfect part ejection distances across varying product sizes.
If your application requires less thrust, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas moving up to 125 mm provides 6136 N. The adjustable 30 mm window is ideal for product changeovers, allowing you to trim the stroke without swapping the cylinder or adding external stops. Because the 425 mm stroke is relatively long, ensure an external guide supports the load to prevent excessive side-loading on the 25 mm rod.
When replacing an ISO 15552 cylinder, verify the 100 mm bore, 425 mm nominal stroke, 30 mm adjustment range, PT port threads, and the -S magnet option. This SAIJ profile cylinder uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR configurations. Operating speed ranges from 30 to 800 mm/s, regulated by adjustable air cushions at both ends.
Quick checklist
At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 425 mm nominal stroke by up to 30 mm, creating a 395 to 425 mm travel window. It only sets the end position and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.