
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 425 mm nominal stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 385 to 425 mm. This built-in adjustability allows you to dial in exact retract end positions during commissioning without adding external stops.
This model incorporates a 25 mm carbon steel rod with an M20x1.5 thread, paired with G1/2 PT ports. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE electronic switches if a magnet is added later. It uses variable air cushions at both ends to decelerate the load smoothly, and relies on a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-stop by up to 40 mm to accommodate different product lengths on the same production line without swapping cylinders.
Fine-tune the 385-425 mm travel window during machine setup to achieve exact positioning, eliminating the need for makeshift external mechanical stops.
Select this 100 mm bore cylinder when an application demands high force alongside precise retract positioning. If the workload requires less thrust, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. Conversely, moving up to a 125 mm bore provides 6136 N. The SAIJ100X425-40 is chosen over a fixed-stroke SAI when a product line requires variable end-stops or frequent changeovers. Because the 425 mm stroke is relatively long, an external guide is recommended to support the load and prevent excessive rod side-loading.
When matching this cylinder for an ISO 15552 replacement, verify the 100 mm bore, 425 mm stroke, 40 mm adjustment range, G1/2 PT ports, and the required mounting style. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for dead-air load holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 40 mm. This creates a usable travel window of 385 to 425 mm, enabling fine-tuning of the retract position during commissioning.
At 0.7 MPa, the push force increases to 5497 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.