
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in exact end positions during commissioning without swapping out the physical cylinder or adding bulky external stops.
This bore size features a robust 25 mm carbon steel piston rod with an M20x1.5 thread, paired with G1/2 PT ports and 36 mm variable air cushions at both ends. Because it includes the -S magnet option, the barrel integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side sensor grooves. The extruded aluminum profile maintains standard ISO 15552 mounting interchangeability, supporting Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly shift the retract end-stop by up to 40 mm when switching a packaging line to a different carton length, eliminating the need to physically swap cylinders or reposition hard stops.
Dial in the exact 385-425 mm travel window during machine setup to perfect the seating pressure of a 3927 N assembly press without altering the pneumatic plumbing.
Handle diverse part sizes on a single transfer conveyor by adjusting the stroke end-point on the fly to accommodate varying product widths and geometries.
The adjustable stroke is ideal for production lines running mixed product sizes, letting you shift the retract end-stop by up to 40 mm on the fly. When specifying a replacement, match the 100 mm bore, 425 mm stroke, 40 mm adjustment, G1/2 PT ports, and the -S magnet requirement.
Because the 425 mm stroke creates a long lever arm, the 25 mm rod needs external guidance to prevent excessive side-loading and premature seal wear. Remember that the rear adjuster acts purely as a mechanical stop and does not lock the load; if you need to hold position without live air pressure, integrate an external pilot-operated check valve or select an AirTAC SAIL or BSAI locking cylinder instead.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 5497 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 425 mm nominal stroke by up to 40 mm, providing a usable travel window of 385-425 mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.