
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod with an M20x1.5 thread and a G1/2 PT port. Because of the 50mm adjustment code, the usable travel window spans 375 to 425mm, allowing you to dial in the exact retract position without swapping hardware.
This adjustable stopper enables fine end-position tuning at commissioning or during product changeovers, entirely eliminating the need for external stops. The extruded aluminum barrel includes sensor grooves on both sides, and if you later require position feedback, adding a -S magnet allows the use of AirTAC CMSE reed or DMSE electronic solid-state sensors.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract distance by up to 50mm when switching product sizes on the line, avoiding cylinder removal or mechanical repositioning.
Fine-tune the 375-425mm travel window during commissioning to achieve precise end-positioning without machining custom external spacers.
Choose this 100mm bore when a 80mm cylinder lacks thrust; stepping up from 80mm increases push force at 0.5 MPa from 2513N to 3927N, while dropping to 125mm yields 6136N. An adjustable stroke is preferred over a fixed SAI when your setup requires variable end-stops or commissioning fine-tuning. For load-holding without live air pressure, note that the rear adjuster acts only as a travel stop, not a lock; consider SAIL or BSAI cylinders instead. When matching ISO 15552 replacements, verify bore, stroke, 50mm adjustment, G1/2 port, and mounting style.
With a 425mm stroke, the 25mm rod diameter provides robust support, but long unsupported travels still need an external guide to manage side loads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 425mm nominal stroke down to 375mm, providing a 50mm tuning window. It sets the travel end but does not lock the load without live air pressure.
At 0.7 MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.