
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 350 to 425 mm. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for position detection.
Because the stroke extends past 300 mm, the 25 mm carbon steel rod and M20x1.5 thread should be paired with an external guide to manage side loads. The rear stopper allows you to fine-tune the retract end position during commissioning without adding external stops. Remember that this adjuster acts only as a travel stop, not a lock, so the cylinder cannot hold loads without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position by up to 75 mm when switching between product sizes on the line, avoiding the need to physically swap cylinders for different formats.
Control the ejection length of large parts by setting the travel window between 350 and 425 mm, accommodating varying conveyor distances or bin sizes.
The 75 mm adjustment range is ideal for product-size changeovers on a line, letting you dial in the exact end-stop mechanically rather than swapping out a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, you would need to step up to a SAIL or BSAI variant, or integrate an external pilot-operated check valve.
To replace an ISO 15552 cylinder with this SKU, match the 100 mm bore, 425 mm nominal stroke, 75 mm adjustment, PT tapered port thread, and the -S magnet requirement. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. Position sensing is handled by AirTAC CMSE reed or DMSE electronic switches mounted in the dual sensor grooves.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from its 425 mm nominal length down to 350 mm. This provides a 75 mm tuning window for commissioning, though it functions only as a travel stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.