verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X45-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke45 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$162.19 $176.82Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10

The AirTAC SAIJ100X45-10 is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical adjuster, enabling you to trim the nominal 45 mm stroke back by up to 10 mm. This yields a precise 35-45 mm usable travel window, allowing exact end-position tuning at commissioning without swapping hardware or adding external stops. It features a robust 25 mm carbon steel piston rod and a G1/2 port to handle high flow demands.

The extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE electronic switches if a magnet is specified later. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X45-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10 Is Used

tune

End-Stop Calibration

Dial in the precise 35-45 mm travel distance during machine commissioning to perfectly seat heavy components without relying on hard external fixtures.

settings_input_component

Product Size Changeover

Quickly adapt automated lines for varying part lengths by turning the rear adjuster up to 10 mm, eliminating the need to physically swap out the entire cylinder.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10 the Right Cylinder?

Select this 100 mm bore when an 80 mm cylinder lacks thrust—stepping up from 2513 N to 3927 N at 0.5 MPa ensures reliable movement for heavier fixtures, whereas dropping to an 80 mm bore saves space if the load is lighter. The adjustable stroke is ideal for product-size changeovers on a line, letting operators dial in the exact 35-45 mm end-stop on the fly instead of machining custom spacers. For exact ISO 15552 replacement matching, verify the 45 mm stroke, 10 mm adjustment range, G1/2 PT port, and your required mounting style from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Because the stroke is short at 45 mm, side-loading on the 25 mm rod is minimal, but always ensure the load is guided to prevent binding. Remember that the rear adjuster is a physical stop, not a locking device; if you need to hold the load safely without continuous air pressure, consider an AirTAC SAIL or BSAI series cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10 FAQ

If pressure is increased to 0.9 MPa, the push force scales up to 7068 N.

The rear adjuster screw acts as a mechanical stop that lets you shorten the 45 mm nominal stroke by up to 10 mm, creating a 35-45 mm usable travel window. It sets the retract end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X45-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.