
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X45-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X45-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables position sensing with AirTAC CMSE reed or DMSE electronic switches.
This specific configuration uses a 45mm nominal stroke paired with a 10mm adjustment screw, yielding a precise 35-45mm usable travel window. The extruded aluminum barrel features sensor grooves on both sides, and the standard carbon steel rod provides high rigidity for demanding industrial environments.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 35-45mm insertion depth for heavy bearing press fits during machine commissioning without swapping physical spacers.
Fine-tune the end-of-stroke position to compensate for mechanical wear over time, ensuring consistent cycling performance.
The 10mm rear adjuster allows you to dial in the exact 35-45mm travel during commissioning without adding external stops.
For direct ISO 15552 interchangeability, match the 100mm bore, 45mm stroke, PT tapered port thread, and carbon steel rod. The SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster is a travel stop, not a locking device; it cannot hold a load without live air pressure, so consider a SAIL or BSAI cylinder if dead-load holding is required.
Quick checklist
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 45mm nominal stroke by up to 10mm. This creates a 35-45mm usable travel window for fine-tuning at commissioning, though it does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.