
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X45-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X45-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 100mm bore and a 45mm nominal stroke, yielding a usable travel window of 25 to 45mm. This built-in adjustment allows operators to dial in the exact retract end-position during commissioning without adding external stops.
Air enters via a G1/2 PT threaded port, driving the 25mm carbon steel rod at speeds of 30-800mm/s. The extruded aluminum barrel incorporates sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 25 to 45mm insertion depth for delicate press-fit operations during machine setup without changing the physical cylinder length.
Adjust the retract stop by up to 20mm to accommodate different package sizes on a packaging line, minimizing downtime between production runs.
The 20mm adjustment range is ideal for product-size changeovers on a line, letting you shorten the stroke down to 25mm on the fly instead of physically swapping cylinders. Because the rear screw acts only as a travel stop and the air cushions manage deceleration, neither component will hold a load without live air pressure. For dead-load holding, consider an AirTAC SAIL or BSAI variant.
When replacing an ISO 15552 cylinder, verify the 100mm bore, 45mm stroke, 20mm adjustment range, G1/2 port, and mounting style. The 25mm rod and M20x1.5 thread provide excellent rigidity, though any stroke combined with heavy offset loads should still rely on an external guide to prevent binding.
Quick checklist
At the maximum operating pressure of 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 45mm nominal stroke down to a minimum of 25mm. This creates a 25-45mm adjustable travel window for fine-tuning the end position without needing external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.