
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X45-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port. Because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
With a 45mm nominal stroke and a 30mm adjustment range, you can dial the effective travel down to a 15-45mm window. This built-in mechanical stopper allows you to fine-tune the retract position at commissioning without adding external stops. The extruded aluminum barrel retains standard ISO 15552 mounting dimensions, utilizing a reduced set of brackets: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly shift the 15-45mm travel window during format changes on the production line without disassembling machine framing.
Fine-tune the retract stop during initial commissioning to dial in exact clamping or positioning distances mechanically.
Leverage the -S magnet with DMSE electronic sensors to confirm the adjusted end position before initiating the next machine cycle.
Choose this 100mm bore when an 80mm cylinder lacks thrust; stepping up from 80mm increases push force from 2513N to 3927N at 0.5 MPa, while dropping down to a 63mm bore drops force to 1559N. An adjustable stroke is ideal for product-size changeovers on a line, letting you shift the end-stop mechanically rather than swapping the entire cylinder. For applications requiring the load to be held without live air pressure, note that this rear adjuster acts only as a travel stop and not a lock; you should specify an SAIL or BSAI cylinder, or use an external pilot-operated check valve. To match this ISO 15552 replacement, verify the 100mm bore, 45mm stroke, 30mm adjustment, PT port, and -S magnet.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that lets you shorten the 45mm nominal stroke, providing a usable travel window of 15-45mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.