verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X45-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke45 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$162.19 $176.82Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40

The AirTAC SAIJ100X45-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 45 mm nominal stroke that can be dialed back by up to 40 mm, yielding a precise 5-45 mm usable travel window.

The rear adjustment screw acts purely as a mechanical stop for end-position tuning and does not hold the load without live air pressure. It uses a PT tapered port and a 25 mm carbon steel rod with an M20x1.5 thread, providing substantial rigidity. For load-holding without continuous air, consider the SAIL or BSAI series instead.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X45-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40 Is Used

settings_input_component

Product Size Changeovers

Quickly dial in the 5-45 mm travel window during line format changes to accommodate varying part dimensions without changing hardware.

tune

Commissioning Calibration

Trim the retract end position by up to 40 mm during initial machine commissioning to achieve perfect mechanical alignment.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40 the Right Cylinder?

Choose this adjustable-stroke model when your machine setup requires frequent end-position tweaking or product-size changeovers without physically swapping cylinders. If you need slightly less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. Because the SAIJ uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets, verify your mounting interface matches this ISO 15552 profile cylinder.

Since the 25 mm rod handles side loads well but the stroke is short, external guides are less critical here than on longer strokes. The cylinder operates at speeds of 30-800 mm/s. Without a magnet (-S suffix), it cannot host CMSE or DMSE sensors for position feedback.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40 FAQ

The rear adjuster screw allows you to shorten the 45 mm nominal stroke by up to 40 mm, creating a 5-45 mm usable travel window. This stopper only sets the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X45-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.