
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X45-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X45-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers substantial thrust, pushing 3927N at 0.5 MPa and pulling 3681N. The integrated -S magnet enables position sensing with AirTAC CMSE reed or DMSE electronic switches. A standard carbon steel rod and M20x1.5 rod thread provide robust durability for heavy-duty operations.
This specific SKU features a 45mm nominal stroke paired with a 40mm adjustment range, creating a highly versatile 5-45mm usable travel window. The rear stopper screw allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. It utilizes a PT tapered port thread and includes variable air cushions at both ends to manage kinetic energy, though the adjuster acts only as a travel stop and does not hold the load without live air.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X45-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 5-45mm travel window during format changes on packaging lines, allowing rapid adaptation to different package sizes without changing hardware.
Use the rear adjuster to set precise retract end positions during initial setup, absorbing mechanical tolerances without adding external stopper blocks.
Choose this 100mm bore cylinder when an application demands high force combined with a very short, finely tunable travel distance. Conversely, if you need greater thrust, a 125mm bore provides 6136N. The adjustable 5-45mm window is ideal for product-size changeovers on a line, replacing fixed-stroke SAI cylinders when exact end stops vary.
Because the stroke is under 300mm, side-load risks are minimized, but the 25mm rod diameter still handles robust mechanical loads. For dimensionally interchangeable ISO 15552 replacements, match the 100mm bore, 45mm stroke, 40mm adjustment, PT port, and -S magnet. Note that SAIJ supports a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. If the machine requires load-holding without live air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a lock.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to trim the effective travel back by up to 40mm from the 45mm nominal stroke, creating a usable 5-45mm travel window. The adjuster acts as a mechanical stop to set the end position and does not function as a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.