
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 100mm bore and a 450mm stroke, paired with a PT tapered port thread and a carbon steel piston rod. This configuration provides a usable travel window of 440-450mm, allowing you to dial in the retract position precisely during commissioning.
Because the adjuster acts purely as a mechanical stop, it sets the end-of-travel position without holding the load under zero air pressure. For load-holding requirements without live pressure, consider the SAIL or BSAI variants. This model includes variable air cushions at both ends and utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 440-450mm window during initial machine commissioning without swapping out the entire actuator.
Quickly adjust the end-stop by up to 10mm on packaging lines when processing slightly different product lengths, minimizing downtime.
The 10mm adjustment window is ideal for fine-tuning product changeovers. If you need to hold a load without live air, this adjustable stop is insufficient, and a SAIL lock or BSAI clamp-lock cylinder is required.
As a dimensionally interchangeable ISO 15552 profile cylinder, it matches standard mounting footprints. To replace a cylinder, verify the 100mm bore, 450mm stroke, PT port, and mounting style. Note that at 450mm of travel, the 25mm carbon steel rod and M20x1.5 thread handle high thrust well, but long unsupported strokes still require an external guide to prevent side-loading damage.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from 450mm down to 440mm. It is a travel stop only, not a lock, so it cannot hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.