
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X450-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 450 mm nominal stroke that can be dialed back by up to 100 mm, yielding a precise 350-450 mm usable travel window.
The rear stopper screw enables fine end-position tuning during commissioning or product changeovers without swapping the cylinder or adding external stops. It utilizes a G1/2 port and a 25 mm carbon steel rod with an M20x1.5 thread. Note that the adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for dead-air holding, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 350-450 mm stroke window during production line changeovers to accommodate different large-format product dimensions without changing hardware.
Fine-tune the retract end-stop during machine commissioning to perfectly align heavy 100 mm bore loads, avoiding the need for external shims.
Adjust the travel end on the fly for custom pressing or forming operations that require different depths within the 100 mm adjustment band.
The 100 mm adjustment range is ideal for machinery requiring significant product-size changeovers. When replacing an ISO 15552 cylinder, match the 450 mm stroke, 100 mm adjustment, G1/2 PT port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because this model lacks the -S suffix, it has no magnet for CMSE or DMSE sensors.
With a 450 mm stroke, the 25 mm rod and M20x1.5 thread provide rigidity, but long unsupported travel still demands an external guide to prevent side-loading damage. The rear adjuster and air cushions manage deceleration, but a plain SAIJ will not hold position without live air; use an external rod lock or pilot-operated check valve if dead-air holding is required.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N, with a maximum push force of 801 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 450 mm nominal stroke by up to 100 mm. This creates a usable travel window of 350-450 mm for fine-tuning the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.