
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X450-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 350 to 450 mm. The extruded aluminum barrel features sensor grooves on both sides, and because this SKU includes the -S magnet, it directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise end-position detection.
This model uses a carbon steel piston rod with an M20x1.5 thread and a G1/2 port. The rear mechanical stopper allows you to fine-tune the retract end position during commissioning or product changeovers without adding external physical stops. It carries a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard cylinders.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 350-450 mm retract end-stop during production line format changes without physically swapping cylinders or reworking fixture positions.
Fine-tune the final end position at commissioning to achieve exact contact alignment, using the 100 mm adjustment range to compensate for mechanical tolerances.
An adjustable stroke is ideal here for variable end-stop requirements, letting you dial in the exact 350-450 mm travel on the fly instead of swapping to a fixed-length SAI cylinder. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true pneumatic locking without pressure, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 450 mm nominal stroke, 100 mm adjustment range, G1/2 PT port, and the -S magnet requirement. Because the 450 mm stroke is relatively long, the M20x1.5 carbon steel rod can still experience deflection under heavy lateral loads, so an external guide rail is recommended to prevent premature seal wear.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 100 mm, creating a 350 to 450 mm usable travel window. It only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.