
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a standard carbon steel piston rod and PT tapered port threads. By integrating an external adjusting screw, this model allows you to trim the effective travel back by up to 20 mm, creating a precise 430-450 mm usable stroke window without swapping out the entire actuator.
This on-machine tunability is ideal for dialing in end positions during commissioning or adapting to minor product size changes on a line. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 430-450mm stroke window during format changes on the production line without disassembling machinery.
Fine-tune the retract position at commissioning using the rear screw to achieve exact alignment without adding external stops.
Choose this 100mm bore when your application requires substantial thrust, stepping up from a 63mm bore that offers 1559N at 0.5 MPa. The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops for machine setup and changeovers rather than relying on external stops. For load-holding without continuous air pressure, you must look to the SAIL or BSAI series, as the SAIJ adjuster is not a locking mechanism.
Because this actuator features a 450mm stroke, the 25mm rod diameter and M20x1.5 rod thread provide robust support, but an external guide is still recommended to prevent excessive side-loading on the piston. When matching this for an ISO 15552 replacement, verify the 100mm bore, 450mm stroke, 20mm adjustment, PT port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The rear adjusting screw acts as a stopper that lets you shorten the nominal 450mm stroke by up to 20mm, providing a usable travel window of 430-450mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.