
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X450-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external stopper screw, you achieve a usable travel window of 410 to 450 mm, allowing precise end-position tuning during commissioning without swapping hardware.
This model features a carbon steel piston rod with an M20x1.5 thread, paired with a G1/2 port for high airflow. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept reed CMSE or electronic DMSE switches if a magnet is specified later. It relies on variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 410 to 450mm retract distance when switching machinery between different product lengths, avoiding the need to physically swap out cylinders.
Perfect the final end-of-stroke position during initial commissioning by turning the rear screw, compensating for mechanical tolerances without adding external bumpers.
The 40mm adjustment range is ideal for product-size changeovers on a line, letting operators dial in the exact retract distance on the fly instead of machining external stops. Because the stroke is 450mm, the M20 rod needs an external guide to prevent excessive side-loading and premature seal wear.
When matching this adjustable unit for an ISO 15552 replacement, verify the 450mm stroke, 40mm adjuster, PT tapered port thread, and mounting style. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Remember that the rear adjuster is a travel stop, not a lock; the cylinder cannot hold a load without live air, so consider an external rod lock or SAIL cylinder if dead-load holding is required.
Quick checklist
It operates efficiently within a speed range of 30-800 mm/s.
The rear adjuster acts as a mechanical stop that shortens the nominal 450mm stroke by up to 40mm, creating a usable travel window of 410 to 450mm. It sets the retract end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.