
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X450-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 410 to 450 mm. The integrated magnet enables position detection with AirTAC CMSE reed and DMSE electronic sensors.
This adjustable-stroke design allows you to fine-tune the retract end position during commissioning without swapping out the entire cylinder or adding external stop blocks. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting, and the standard PT G1/2 porting ensures high flow capacity for its 30-800 mm/s operating speed range.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 410-450 mm retract position during production line size changes without disassembling tooling or swapping cylinders.
Fine-tune the final resting position of heavy actuators at machine commissioning to achieve precise mechanical alignment.
Adjust the depth of stroke dynamically for different material thicknesses in heavy-duty pneumatic pressing stations.
The 40 mm adjustment range is ideal for product changeovers on a line where the exact end-of-stroke position varies slightly between part sizes. For load-holding without live air pressure, note that the rear adjuster acts only as a travel stop and not a lock; you should instead specify an SAIL or BSAI cylinder, or use an external pilot-operated check valve. When replacing an ISO 15552 cylinder, match the 100 mm bore, 450 mm stroke, PT G1/2 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the 450 mm stroke is relatively long, ensure adequate external guidance to prevent excessive rod side-loading.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 40 mm, creating a 410 to 450 mm usable travel window. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.