
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 PT port. The built-in stopper screw provides a 400 to 450mm usable travel window, letting you trim up to 50mm off the nominal 450mm stroke.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during product changeovers. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of switches, and the mounting hardware uses the reduced SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 400-450mm window during machine setup, avoiding the need to machine custom spacers for different product sizes.
Quickly shorten the stroke by up to 50mm on a packaging line when switching to a smaller carton format, keeping downtime to a minimum.
The 50mm adjustment range is ideal for fine-tuning retract end positions at commissioning without adding external stops. Because the stroke is 450mm, the 25mm rod needs external guiding to prevent excessive side-loading on the seals.
To replace an ISO 15552 cylinder, match the 100mm bore, 450mm nominal stroke, 50mm adjustment, G1/2 PT port, and mounting style. This SKU uses a carbon steel rod and lacks a magnet. Note that the rear adjuster is a travel stop, not a lock; the cylinder will not hold a load without live air, so use a SAIL or BSAI variant if load-holding is required.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke from 450mm down to 400mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.