
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X450-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered ports. The built-in rear stopper allows you to dial back the 450mm nominal stroke by up to 75mm, creating a precise 375-450mm usable travel window for exact end-position tuning.
This adjuster acts strictly as a mechanical stop to fine-tune the retract position during commissioning or product changeover, eliminating the need to swap cylinders or bolt on external stops. It is important to note that neither the rear adjuster nor the variable air cushions will hold a load without live air pressure. For position holding, a SAIL or BSAI variant would be required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X450-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 375-450mm stroke window during product size transitions without physically swapping the actuator or adding shims.
Fine-tune the retract position at machine commissioning to achieve exact mechanical alignment using the rear adjusting screw.
Accommodate varying material lengths on a production line by adjusting the stroke back up to 75mm to suit each job.
The 75mm adjustment range is ideal for machinery requiring variable end-stops during format changes. When replacing an ISO 15552 cylinder, match the 100mm bore, 450mm stroke, 75mm adjuster, PT port threads, and mounting style. Because the stroke is 450mm, the M20x1.5 rod is highly susceptible to side-loading; an external guide rail is recommended to prevent premature seal wear.
Mounting options for this series include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed or DMSE electronic switches if a magnet is specified later.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that shortens the 450mm stroke by up to 75mm, yielding a usable travel window of 375-450mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.