verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X475-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 475mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke475 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$272.46 $294.54Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S

The integrated magnet enables position feedback via CMSE reed or DMSE electronic sensors. With a nominal 475mm stroke and a 100mm adjustment range, you can fine-tune the retract end-position to create a precise 375-475mm travel window during commissioning.

This adjustable stopper allows you to dial in the exact end-of-stroke without swapping the cylinder or adding external stops. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rod with an M20x1.5 thread provides robust resistance to side loading. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke475 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×475Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S Is Used

settings_input_component

Product Size Changeovers

Quickly shift the retract position by up to 100mm when processing different product lengths on the same conveyor line.

precision_manufacturing

Machine Setup Tuning

Fine-tune the end-of-stroke at commissioning to dial in exact clamping or pressing positions without mechanical shims.

factory

Variable End Stops

Provide a flexible 375-475mm travel window for automated assembly stations requiring periodic stroke adjustments.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S the Right Cylinder?

The 100mm adjustment code is ideal for product-size changeovers on a line, letting you shift the end-stop by up to 100mm on the fly instead of installing a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, you must integrate an external rod lock or pilot-operated check valve, as the SAIJ rear adjuster is a stop, not a clamp. To replace an ISO 15552 cylinder, match the 100mm bore, 475mm stroke, PT tapered port, and -S magnet. Because the stroke is 475mm, ensure an external guide supports the load to prevent excessive rod side-loading.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear adjuster screw allows you to trim the effective travel back by up to 100mm from the 475mm nominal stroke, creating a usable 375-475mm window. It acts as a physical stop and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X475-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.